Cylinder head ultrasonic cleaning machine (steel diesel engine and aluminum cylinder head) Cup 3D Mask Machine,Fold Flat 3D Mask Machine Online,Kn95 Certified 3D Mask Machine Online,N95 Certified 3D Mask Machine Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.aitopsolution.com
Due to long-term use, the oil and dirt generated during the combustion process adhere to and accumulate on the surface of the cylinder and cylinder head of the diesel engine. Therefore, the diesel engine needs to be periodically disassembled and cleaned before repairing.
Conventional cleaning method
Cylinders and cylinder heads are usually cleaned by hand scraping and wire wiping. This time-consuming and labor-intensive cleaning method takes three to four hours. Moreover, the degree of cleanliness is directly dependent on the individual effort of the operator, so it is difficult to achieve uniform cleanliness.
Ultrasonic cleaning
Ultrasonic cleaning provides an efficient cleaning method for decontamination of cylinders and cylinder heads. Ultrasonic cleaning of the workpiece does not require manual scraping or wiping.
Typical ultrasonic cleaning workpieces are as follows:
(1) Ultrasonic immersion in sputum for up to fifteen minutes
(2) rinse with water
(3) air drying
Cleaning effect
Ultrasonic cleaning of cylinders and cylinder heads is superior to manual cleaning: thorough cleaning, low time consumption, high cleanliness and uniformity. Ultrasonic cleaning time will be reduced from three to four hours to fifteen minutes.
Cleaning fluid requirements
Ultrasonic cleaning of stainless steel "target=_blank> stainless steel cylinder heads should be carried out in strong sputum, and aluminum cylinder heads should be cleaned in weak sputum.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn