The Shackles (both body and pin) WinnerLifting provides are made of high strength alloy steel through advanced production line and intermediate frequency furnace heat treatment.They have the advantage of high-intensity,light weight,nice appearance as well as good toughness.
And yet,all these US type shackles,including there screw pins and bodys meet the requirements of federal specification RR-C271D type IVB,grade A,class 2.
In a word,you can find quite good shackles here!Contact us for more!
Galvanized Shackles,Us Type Chain Shackle,Us Type Anchor Shackle,Bolt Type Anchor Shackle WINNERLIFTING SAFETY EQUIPMENT CO.,LTD. , https://www.winnerlifting.com
Regular cleaning and maintenance of the vacuum cleaner can extend its service life. But many people actually don’t know how to clean the industrial vacuum cleaner. Now let’s explain it to you:
1. Before using the vacuum cleaner, you should check to clean the dust bag (the dust bag should be noted whether it is damaged), the dust box or the bucket is cleaned. If there is foreign objects or full, it should be poured out before use.
2. Before use, check whether the power cord and plug are damaged. After use, wrap the power cord into a tie and hang it on the hook of the top cover of the machine head.
3. During use, please be careful not to use continuously for too long, and should be kept within 2 hours as much as possible. To avoid overheating of the motor and affecting the service life of the vacuum cleaner.
4. If you find that the dust is close to full gear or if foreign objects are found to be blocked by the straw during use, you should turn off the machine immediately and clean it before use.
5. When using a vacuum cleaner, try to stay away from water pumps or strong radiation sources, because any electrical appliance itself will have certain radiation.
6. The brushes of the vacuum cleaner should also be checked frequently to check the wear of the brush. If they are severely worn, they should be replaced in time.
7. After use, remove the dirt in the dust collector bag in time, remove the hair and thread chips on the brush, wipe it with a damp cloth containing water or neutral detergent, and then dry naturally in the sun.
8. After long-term use, it will cause blockage of the filter mesh and lead to a decrease in suction force. Therefore, the filter net and cloth bag should be cleaned regularly with water, then washed, placed in a cool place to dry before use, so that the suction force can be restored.
9. Regularly check the fastness of the parts of the vacuum cleaner. Lubricating oil should be added to the motor bearing of the vacuum cleaner to reduce the wear level of the motor, which can effectively improve the service life of the motor.
10. The hose should not be folded frequently, and should not be stretched or bent excessively. If the sealant pad in the vacuum cleaner has aged and loses elasticity, new pads should be replaced in time.
11. When placing the vacuum cleaner, try not to place the vacuum cleaner in a humid or corrosive gas place, and choose a ventilated and dry place to avoid damage to the body.
If there are any doubts about cleaning the equipment
Suzhou Maihe Environmental Protection Equipment Co., Ltd. specializes in the research and development of cleaning equipment, and develops new products according to different usage occasions to provide users with more and more complete products and services!