In recent years, more and more residential communities have adopted low-temperature radiant heating systems, ie, geothermal floors. This heating method has a large radiation surface and requires low temperature for water supply. The entire floor is uniformly heated and hot air rises from the bottom up. Hot comfort feeling. In addition, its maintenance costs are lower than traditional heating methods. While consumers enjoy the benefits of geothermal heating, they are faced with the problem of how to choose materials to lay on the ground. â– Geothermal floor needs to meet three conditions Not all wood floors can be floor-heated, and floor-heating floors are preferred. The floor heating system achieves the purpose of heating by heating the floor. The floor always maintains a high temperature, and the ordinary floor is easily deformed in such an environment. Therefore, after installing the floor heating system, it is necessary to select the flooring suitable for the floor heating system. According to the characteristics of the floor heating, floor heating should meet three conditions: 1. adapt to cold and heat repeated transformation, small deformation; 2. conducive to heat conduction; 3. moisture resistance and waterproof. Since wood is a poor conductor, the greater the thickness, the more adverse the heat conduction. At present, most floors on the market such as 12-18mm thick solid wood flooring, bamboo flooring, ordinary solid wood composite flooring and laminate flooring with a thickness of more than 8mm are not suitable for ground heating radiation systems, otherwise it will affect heat conduction or cause floor deformation . In the same environment, the deformation rate of solid wood flooring is the largest, followed by the strengthening of wood flooring, and the deformation of solid wood flooring is the smallest, because the base material of each layer is interlaced horizontally and vertically, and they are mutually restrained; the back also has dense deformation-resistant grooves, decomposition The stress generated by the heated surface. The thermal conductivity of the floor is related to the thickness of the floor. The thickness of the solid wood floor is similar to that of the reinforced floor. The difference is that the anti-deformation groove on the back of the solid wood floor facilitates air circulation and reduces noise; the surface of the reinforced floor is resistant to metal oxides. In the grinding layer, the heat is diffused very quickly and evenly at the surface and the indoor temperature is easily controlled. However, the surface layer of multi-layer solid wood composite flooring is thin, not easy to care for and cannot be refurbished, which affects the service life. The price of three-layer solid wood is relatively expensive. In view of the above problems, strengthening the floor has always been the main force of geothermal flooring. Laminate flooring has obvious advantages in terms of floor deformation rate, surface wear resistance, cleaning and maintenance. In addition, the quality of the floor is "three-point floor and seven-point installation", and the installation standards for professional floor heating are higher. Therefore, it is better to provide professional installation by the manufacturer and avoid installation by the construction team. Flooring Purchase Natural Flooring Flooring Picture Light
LEDER technology`s picture light provides appropriate lighting is going to add shine to your beloved elements especially for a fine piece of artwork on your wall. It not only highlights your favorite pieces of wall paintings but also creates an inviting atmosphere around the surroundings. 560lm appropriate brightness avoids the light being too dim or overwhelming.
Now give it the lighting it deserves with this frame-mounted picture light! Made from metal, this sleek fixture features a built-in 2 W LED system, shining 77 lumens of 3000k soft white light on your painting, portrait, or poster with the flick of a switch. Rounding out the design, a simple bracket affixes to your frame for effortless installation.
Features:
• Simple and modern design
• Dimming brightness
• Adjustable light intensity
• Energy saving save electricity
• Color temperature :3000k-6000K
• Adjustable angle: Allows for light distribution in the direction that best suits your space.
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
Thanks to its understated silhouette and neutral solid finish, this picture light is versatile enough to blend with a variety of color palettes and aesthetics, and let you focus on your art.
We have rich production experience in lighting.Except Decoration Lighting , we also offered other product in Indoor Lighting .Such as :
LED Panel Light , Track Light , Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
Photo Clip String Lights,Photo String Lights,Led Picture Light,Lighting Images JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightoutdoor.com
The floor heating technical personnel introduced that the selection of geothermal floor should be based on the specificity of geothermal heating methods: to adapt to cold and heat repeated conversion and conducive to heat conduction, geothermal floor needs to meet two conditions: small deformation; conducive to heat conduction.
At present, several types of floorings are popular. Under the same environmental conditions, solid wood floorings have a greater amount of deformation than laminate floorings, and laminate floorings have a greater amount of solid wood flooring. The reason for the small amount of deformation of multi-layer solid wood flooring is its base material, each horizontal and vertical staggered and intertwined with each other; the back also has dense deformation-resistant grooves, which decomposes the stress generated by the heated surface, and therefore its deformation is minimal.
The thermal conductivity of the floor is related to the thickness of the floor. The thickness of the solid wood floor is similar to that of the reinforced floor. The difference is that the anti-deformation groove on the back of the solid wood floor facilitates air circulation and reduces noise; the surface of the reinforced floor is resistant to metal oxides. In the grinding layer, heat spreads very quickly and evenly over the surface.
Laminate flooring is the main force