There are many kinds of bathroom components, including washbasins, toilets, bathtubs, etc. In the face of the diversification of the current market demand, the design and quality of sanitary wares are also unpredictable, and the following nine sects of building materials network will teach you to judge The quality of the sanitary ware. First, look at the blank The quality of the blank directly determines the water permeability of the ceramic. At present, the firing process of ceramics has been greatly improved, and most brands use high-temperature ceramics fired above 800 degrees. But the same is the high temperature pottery, the gap between the grades is very obvious, the length of the high temperature tunnel kiln directly determines the texture of the ceramic, the longer the tunnel, the longer the time from heating to cooling of the ceramic, the small temperature change during the firing process, the product is not easy to turtle Crack, resistance to rapid cooling and heat; high temperature tunnel kiln is short, from high temperature to cooling process, the ceramic texture is relatively brittle and easy to crack. The cost of high-temperature tunnels is very high, and the average cost per meter is nearly 150,000 yuan. Therefore, some small-scale manufacturers directly cool outside the kiln, and the difference in quality is even greater. In addition, only the kiln is large enough to burn high water tanks, save water and wash more cleanly. The second is to look at the glaze The brand of glaze, the thickness of the glaze layer and the firing process directly determine the effect of the glaze of the sanitary ware. The imported glaze is used. The surface of the glaze layer is smooth and delicate, full of texture, crystal clear, looks very comfortable, and self-cleaning. Strong ability and low water permeability. The water pipes of the middle and high-grade sanitary wares and the inner wall of the water tank are also glazed, which is very important to prevent the toilet from being dirty. However, this process is very difficult, and the domestic brands are rarely able to do it. An important indicator of the grade of sanitary ware. The third is to look at the accessories The traditional copper water parts and floating ball irrigation have been eliminated. At present, the good water parts are made of imported PVC materials and vacuum irrigation technology, and the anti-corrosion and anti-rust performance and leakage prevention performance are greatly improved. The water parts of brand-name sanitary ware are supplied by professional manufacturers. The fourth is to look at the whole The well-shaped sanitary ware should not only be aesthetically pleasing, but also conform to the ergonomics and comfortable to use. The mold, equipment and design capabilities of the manufacturer are the determining factors. High-level manufacturers generally use imported molds. Jiuzheng Building Materials Network Xiaobian summary: Learn four steps to judge the quality of sanitary ware, help you to create a quality bathroom. Komatsu Electrical Parts,Komatsu Forklift Parts,Excavator Electrical Parts,Quality Komatsu Electrical Parts JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com