Teach you to identify whether the whole wardrobe is regular or OEM

The use of whole wardrobes has become more common in recent years, and consumers do not understand the pros and cons of the plates used by each manufacturer and the degree of environmental protection. Many small-scale and black-hearted merchants take this opportunity to confuse the market and use inferior, non-environmentally friendly plates and hardware to sell off the regular manufacturers' brands and make huge profits. Caused everyone to doubt the entire industry, in fact, the plate of the regular manufacturers is very environmentally friendly, well-known brand manufacturers can reach the European E1 environmental standards.

Sofia wardrobe

Here are a few ways to quickly identify the authenticity:

First, look at the model (not the finished model)

The template is usually three-sided, leaving a side to the customer to see the quality of the substrate. First, use your fingernails to scrape and see if you can scrape the powder. If it can, you can't buy it, no matter how cheap the price is, because such plates will be seriously deformed or even broken after encountering a damp environment.

If the powder cannot be scraped, proceed to the next inspection procedure and smell it with your nose to see if there is any irritating odor (smelly socks). If it does, it means that the formaldehyde content is too high, causing great harm to the human body. buy.

If not, look at the veneer (that is, the glossy surface of the plate) and touch it with your hand to see if it is very smooth and if the lines are neat and clear. Usually high-quality panel surface gloss is high. Feel very good, very clear lines. Regular manufacturers generally have anti-counterfeiting marks printed on them and can be seen with their eyes.

Here to explain the material of the veneer, the most used on the market today is a veneer for the three hydrogen amine stickers, the physical and chemical properties of this veneer is relatively stable, with the advantages of moisture, acid and alkali, not easily deformed, and other three hydrogen amine decorative panel No need for post-painting and other finishes, it also reduces the possibility of surface cracking. If the use of environmentally friendly trihydramine plates as the substrate, can reduce the harmful gas emissions.

The last is to look at the seal. The quality of the overall cabinet is related to the quality of the cabinet. Most of the plates produced by regular manufacturers use imported edge banding machines. The edge sealing quality is very high. If you do not look closely, you cannot see the interface between the two blocks. The strength of the plate is very high and it is difficult to separate it with a knife. There is also a regular manufacturer's anti-counterfeiting mark on the edge (as on the panel). OEM processing can not do more than these points.

Buy materials formaldehyde paint chest of drawers