The Latest Development of Tianjin Zhongwang High Value-Added Aluminum Laminate Project

According to the bulk non-ferrous net reprint: China Zhongwang's construction of the first phase of the high value-added aluminum rolled steel project in Tianjin has entered a critical stage. The annual design capacity of the project is 1.8 million tons, including two production lines. The construction of the first production line and the installation of equipment have been basically completed, and equipment debugging of the entire production line is underway. Based on the current progress of the project, the aluminum-rolled steel project is expected to enter the pilot production stage as planned, and it will be put into production before the end of 2015.

Tianjin Zhongwang 2350 mm six-roll CVC cold rolling mill completes first roll load test

On April 14, the 2350 mm six-roll CVC cold rolling mill at Tianjin Zhongwang Cold Rolling Plant conducted a fire extinguishing test, and the high and low pressure CO2 test injections were successfully completed. This provided the next test run for the rolling mills to fill the rolling oil and equipment. Safety assurance; on June 30, the 2350 mm six-roll CVC cold rolling mill successfully completed the first roll load test, which laid a solid foundation for the further optimization of the functions of the 2350mm cold rolling mill systems.

Tianjin Zhongwang 4500mm Heavy Plate Mill Heat Load Test Successful

On May 19th, two 7000kW main motors of the 4500mm wide-thick plate rolling mill in Tianjin Zhongwang hot-rolling mill were started. After nearly two hours of continuous operation, all monitoring indicators of the main motor showed normal, and the main motor was smoothly running without load. A solid step was taken for the equipment to enter the pre-production stage; on August 15th, the thermal load test of the 4500mm wide-thick plate rolling mill in the Tianjin Zhongwang hot-rolling mill was officially started. After repeated rolling, the ingot was finally rolled into aluminum plates. , and divided into 4 copies by heavy cutting. This shows that the heat load test of the 4500mm wide plate rolling mill was successful at one time, which will lay a solid foundation for the subsequent hot rolling of the finishing rolling mill and the continuous rolling of the entire production line.

Tianjin Zhongwang Casting Plant Ignition Oven Wins Successfully

On August 8, Tianjin Zhongwang Aluminum Industry Co., Ltd. held a igniting and baking ceremony. After nearly one hour of continuous observation, all equipment indicators were normal. The relevant person in charge of Tianjin Zhongwang announced that the igniting and drying oven of the smelting plant had achieved a complete success. The successful completion of the smelting furnace for aluminum melting furnaces will lay a solid foundation for subsequent load production.