Laminate flooring is generally composed of four layers of composite materials, namely wear layer, decorative layer, high density substrate layer, balance (moisture-proof) layer. Qualified laminate flooring is one or more layers of specially impregnated thermosetting amino resins. Covered on the substrate surface such as high density board, the back plus balance damp proof layer, front plus decorative layer and wear-resistant layer are made by hot pressing. Strengthen the advantages of the floor: 1. Abrasion resistance: The surface layer of the laminate flooring is a wear-resistant layer. It consists of uniformly distributed Al2O3. Generally speaking, the denser the Al2O3 distribution, the higher the number of floor wear-resistant revolutions. 2. Varieties of flowers and colors are fashionable and can simulate various natural or artificial patterns. 3, easy care: In daily use, just use a wrung rag, mop or vacuum cleaner to clean, if the floor appears greasy, stains, wipe with a cloth dipped in detergent. 5. Compared with solid wood flooring, the wear-resistant layer on the most surface of the laminate flooring is specially treated to achieve a very high hardness, that is, the use of sharp hard objects such as keys to scratch, will not leave traces. 6, good value for money (low price). Laminate floor defects: 1, afraid of the water afraid of the tide: strengthen the floor once the water is filled in the pavement, if not timely wipe, it is easy to cause expansion and swelling, deformation. Its moisture resistance is also not strong and its stability is poor under humid conditions. 2. Poor decoration effect: The surface layer of the laminate flooring is a wear-resistant layer and a decorative layer, and both are printed using bionic technology. Compared with natural wood, the overall paving effect is distorted and the visual effect is relatively stiff. Laminate flooring is divided into the following categories and characteristics Divided from the thickness: thin and thick (0.8cm\1.2cm). From the perspective of environmental protection, thin is better than thick one. Because of its thinness, it uses less glue per unit area. Thick, not as high as the density, impact resistance is almost, but the foot feels better. In fact, the difference is not great. Divided from the specifications: standard board, wide board, narrow board Standard plate: The width is generally 191-195 mm. The length is about 1200-1300. Width: The width is about 295 mm and the length is more than 1200 mm. Narrow plate: The width is basically about 100 mm and the length is 900-1000 mm. Wide board: Advantages look generous and there are relatively few gaps. The disadvantage simulation is not as good as the target. Target: It is a feature of our country. Solid wood flooring looked generous, too expensive, poor stability; floor manufacturers made imitation wood flooring, watching its specifications and solid wood, cheap, stable and good, can be real, thickness is basically about 12 mm. It has been popular in the market for less than a year. Flooring wood flooring laminate flooring Spray Gun,Paint Spray Gun ,Hvlp Spray Gun,Airless Spray Gun Ebic Tools Limited , http://www.ebictools.com
