figure 2 1. Base 2. Multi-port positioning slide 3. Guide block 4. Base 5. Plate 6. Connecting arm 7. Bolt 8. Drill sleeve 9. Drill template 10. Compression bolt 2. Drilling application When machining, position the base seat, and install it on the corresponding multi-slot positioning slide 2 according to the model of the motor base. Then, the base 1 is pushed by hand, and the multi-porting positioning slider 2 is driven along the direction of the guiding groove so that the plane of the base of the base rests against the template 9. Use the pressure plate 8 to press the base of the base 1 and tighten the nut. By starting the machine, you can drill the hole according to the position of the drill sleeve. After the machining is completed, loosen the nut, and manually push the base 1 to pull the multi-slip slide 2 back to the original position, remove the base 1, and then process the next one. 3. Precautions (1) When manufacturing a drilling mold, ensure the corresponding positional accuracy of each part. For example, the parallelism of the skateboard and the base, the perpendicularity of the drill template, the perpendicularity of the guide groove and the drill template, etc. (2) When using, correct the relative position of the drill and the machine, and confirm the hole of the base to be machined. When machining, mark the hole at the foot that needs to be machined to avoid drilling the wrong hole. (3) Between the base and the multi-stop positioning skateboard during use, drip some lubricating oil, which can make the multi-stop positioning slide pusher more labor-saving, convenient and quick. 4. Conclusion Multi-porting machine base foot drilling mold, one installation can meet the four specifications of the motor base foot hole processing, easy to operate, convenient and fast, quality assurance and reliability. Reduce the number of tooling, reduce production costs, and achieve good results. Previous page
Air-Fluid BSPP Series Push-To-Connect Fittings ,which
Body & Collet Construction with H59-1Brass & Nickel Plated, it
suitable for Air, Oil , Water fluid field and tube size for inch and
Metric. The NBR –Seal and O-ring can work with -20°to +150°F Temperature
, Working Pressure is up to 0 - 250 psi , Compatible with: Nylon 6, 11,
12, Polyethylene, Polyurethane.
Push-To-Connect Fittings in Metal Push In Pneumatic Fittings, Push In Tube Fittings, NPT Pneumatic Fittings, BSPP Pneumatic Fittings Cixi Air-Fluid Pneumatic Components Co.,Ltd , http://www.air-fluidfittings.com
China Air-Fluid Manufacturer, Supplier, Exporter, OEM for Pneumatic
Fittings, Nickel Plated Brass Push-fit Fittings, Plastic Push in
Fittings, One Touch Tubing Fittings, Push-To-Connect Tubing Fittings.
Nickel-Plated Brass Push-To-Connect Fittings