In the current market, there are mainly four types of flooring that can be selected: laminate flooring, multi-layer flooring, solid wood flooring, and aluminum-wood geothermal flooring.

Laminate flooring and solid wood flooring are laminated flooring and have been advertised as “most suitable for geothermal” for the past few years—because they are relatively thin, they have good thermal conductivity; because of their good stability, they can be used in geothermal environments. There will be no problems such as cracking, arching, and pull seaming. But in fact, they all have a fatal flaw. That is because these two kinds of floors are not logs. They are all glued together with wood chips or veneer and glue. These glues contain a lot of formaldehyde.

Such as multi-layer solid wood flooring, it is structurally stable. However, its surface is a thin layer of solid wood veneer, not high grade. The base material consists of a piece of fast-growing wood such as eucalyptus, poplar, or willow, which is pressed under high temperature and high pressure under the adhesion of the glue. There is formaldehyde in the glue. Formaldehyde increases with the temperature. Another point is that the glue that adheres to a multi-layered floor has a very high rate of aging in geothermal and high-temperature environments. Over time, it will lose its adhesiveness. In 2 years, it will cause floor delamination. As for the laminate flooring, the grade is even lower. Its base material is made of twigs, various kinds of waste wood and fibrous. After being pressed by the adhesive, it has completely lost the characteristics of the wood and cannot be called at all. Wood.

In previous ideas, people believed that solid wood flooring was not suitable for geothermal environments. The main reason was that solid wood flooring had the characteristics of shrinkage and swelling and was easily deformed. In fact, this refers to the ordinary solid wood flooring buckle. Solid wood lock floor has solved the problem of floor deformation completely through special treatment of wood, and it is easy to install and easy to handle. It has been verified by thousands of users.

Solid wood flooring is a floor that is directly processed by wood. It is natural and does not contain any harmful substances. It is environmentally friendly and healthy in the flooring industry. It can be said that, whether it is from the environmental performance, easy installation, longevity, etc., are completely beyond the laminate flooring, multi-layer flooring and other composite flooring products, but also to avoid all the drawbacks of ordinary solid wood flooring, flooring is more suitable for geothermal environment .

However, the appearance of the aluminum-wood geothermal floor breaks the traditional choice of floor heating for the ground. It is better to meet the requirements of the country in terms of heat and energy control. It is easy to install, has the same comfort as wood, has good load-bearing capacity, is not easy to deform, and is convenient. Health,

Therefore, if you are renting a house, or do not intend to live for a long time, the quality of the decoration is not high, and there are no elderly or children with weak resistance in the house. You can use composite flooring, but if you care about these things, then it is best. Still choose aluminum wood health geothermal floor products.

Decorative Panel

Pvc Twinwall Panel,Decorative Wall Panels,Pvc Decorative Panels,Outdoor Decorative Panels

PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com

Posted on